Skip to main content
Skip table of contents

NSnappy Sense - V1.3_R3115 - 2024-08-27

  • Long 3 second button press now resets the device completely and causes it to rejoin LoRaWAN network the next time device is switched on

  • Reset is indicated by a 2 second long blink of the LED after the 3 second long button press

  • LED blinks at 1 Hz like in previous versions when joined to LoRaWAN network and sending data to server

  • LED blinks at 5 Hz when not joined to LoRaWAN network and trying to join

  • Maximum continuous operating time is 3 minutes, also when trying to join

  • If joining is not successful in the 3 minute continuous operating time, joining attempts will continue the next time device is switched on

JavaScript errors detected

Please note, these errors can depend on your browser setup.

If this problem persists, please contact our support.

Contact Support Close